Wired2Fish
Breaking News
College Fishing Gets Some Ink
College fishing got a little love today in the...
FLW Makes Rule Changes for 2015 FLW Tour
FLW sent out a message a while ago that...
Xpress Boats Xclusive X21 Bass Boat – High Performance Aluminum Boats
In the past, an aluminum boat was a starter...
Batts Signs Title Sponsorship with Mid-State RV
FLW Tour pro Clayton Batts has signed an exclusive...
Minn Kota Launches New Enhanced Website
Minn Kota has launched a new brand specific website...
Daiwa Magseal Technology Protects Their Reels
Daiwa has introduced Magseal technology in their spinning reels...
Hydrowave H2 Winner Announced
In the beginning, anglers were a bit wary of...
Daniel, Flack Win 2015 Alabama Bass Trail Championship
A little more than a year ago, when the...
2015 Bassmaster Opens Schedule Announced
The 2015 Bass Pro Shops Bassmaster Opens tournament series...
Win a New Abu Garcia Veritas 2.0 Casting Rod
This week’s giveaway features the new Veritas 2.0 Casting...

Keeping fish alive is important to every angler. Even those that catch fish to eat want to make sure they are alive as long as possible before cleaning them.

We just came across a new product developed and engineered to provide proper ventilation to a livewell as well as cool the water a few degrees naturally. It’s called the V-T2 from NewPro Products, and even though the design is very simple, the concept is sound.

Concept

Just about all of us with boats have livewell systems with intake and recirculation pumps. Many use an Oxygenator to add oxygen to the water too. One of the cool things about the V-T2 is it uses wind and nature to oxygenate the fish plus remove harmful gases that build up in the livewell. No electricity or pumps, just good old wind and air movement that enters the V-T2 as you run. It can be used solo but in concert with pumps and recirculation systems, it is a perfect system.

One thing anglers often forget is the temperature of the water in the livewell. What may start out as cool water in the early morning can turn into a hot tub as the day progresses. With the temperature increasing, gases build up in the livewell and can kill fish quickly even with the aerator running. The V-T2 eliminates that and cools the water at the same time.

I saw this system advertised but wasn’t for sure about its application until talking to its designer, Judy Tipton and Gene Gilliland, BASS Conservation Director. Tipton is very humble about her product, but one thing is for sure; she knows it works.

Biologist and angler approved

“I spoke to both Gene and Hal Schramm, writers of the book ‘Keeping Bass Alive,’  about the V-T2 when it was in its early stages, and they both agree it is a sound approach and are adding it to their second book,” Tipton said. “In a recent FLW Tour event, Phillip Jarabeck kept his fish alive when the livewell pumps quit, while a few others in his flight lost all of their fish under similar conditions. He told the crowd on the stage that the V-T2 saved his fish and valuable points in the process.”

At this year’s Bassmaster Classic, I spoke to Gene Gilliland about the V-T2 and he emphasized to me that the engineering of the unit was the key. “It forces cooler air into the livewell and vents it out the back via a baffle system” stated Gilliland. “The science behind this little deal is very sound and we believe properly installed can be a bonus for keeping bass alive.

When first looking at them I wondered if water would splash out, but after talking to Tipton and Elite Series pro Rick Morris, they both assured me that it didn’t.

“The way the baffle is designed you get no water splashing out even in rough conditions” said Morris. “I jumped on board with them the minute I saw them in operation and even though I endorse them would have them even if I wasn’t on their pro staff. They work that well.”

My experience

I just installed the V-T2 in my Ranger 106 project and even though it is powered by a very small engine I felt the air that circulates while running and even wind would make it worth it.

The total install took less than an hour and clear instructions come with the kit. The Ranger 106 has a single livewell, so only one V-T2 is needed but larger boats may require one for each livewell lid.

Some of my buddies are using the V-T2 in their rear compartments for ventilation of battery and gas tanks. The design will keep much additional water from entering the sump area than normally would from rain in a boat.

Installs in Minutes

To install use a 3-inch hole bit. Placing a plastic bag under the lid when drilling keeps metal shavings and/or fiberglass from entering the livewell. Make sure to run the bit in reverse not to tear the carpet. Once through the carpet carefully drill out the hole. Four stainless steel screws with washers and nylocks are pre-packed in two sizes for lid thickness. Place the V-T2 in the hole, drill screw slots and tighten and that quickly you may have just saved a bass or two. Be careful to vacuum the lid and carpeted areas thoroughly before and after removing the bag used to catch dust and shavings.

Where to order

The V-T2 is available at Tackle Warehouse and retails for $44.99 for a set of two. All hardware is included.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Advertisements